Tile floor removal

There are numerous reasons one needs to replace his tile floor. It could be the damage while moving heavy machinery.  Maybe it just looks off-colour or too glossy. Or perhaps it should be changed.

So what are the best possible ways of removing a tile floor? It can be done in a few easy steps, but before the start, certain factors need to be considered.

 

Cost to Remove a Tile Floor

A very important factor is the cost of removing a tile floor. Costing depends upon multiple elements that include the size of the room or whether a task is assigned to a professional or normal contractor. The difference is if the professional team is hired for the job, the cost will be relatively high, but the quality of work will be much superior as compared to a contractor who is not specialised to do the job.

This project looks pretty simple and straightforward, but in reality, it is very much time consuming and required a lot of physical strength. In addition to the job, another hectic task is to remove or uninstalled the room decorations while executing the process.

 

Prepare the Area

Before you take the plunge and begin pulling up tiles, you have to prepare your spaces for work. This is a genuinely speedy procedure that will help set you up for progress while guaranteeing you don’t destroy your assets.

Once the starting point is spotted, here is how to get started.

  1. Initiate the task by smashing the first few tiles with a hammer and chisel.
  2. Eliminate the broken pieces and throw them in the bucket. You don’t have to stress over getting each piece, yet getting the greater lumps off the beaten path will help over the long haul.
  3. Examine the underlayment of the floor to ensure there is no dent.

Continue Removing Old Tile

This is the place the genuine work starts. At the point when to begin, however, will differ from individual to individual. When you have expelled enough tile to serenely utilise either you’re quite ready to begin using other tools,  take care of the floor scrubber or air hammer with an etch set, it’s an ideal opportunity to get the main part of the work done.

 

Remove the Underlayment

Once done with the tile, take out the underlayment if it is damaged. With the help of a screwdriver, remove all the screws that have linked the underlayment with the floor. Pry up the edges of the underlayment with the material rake and level scoop.

 

Time to Clean Up

With either your underlayment or subfloor uncovered, it’s an ideal opportunity to tidy up the chaos.

Take your pails loaded up with old tiles, glue and underlayment lumps and toss them out. If your undertaking was bigger, consider a dumpster rental for tile transfer, instead of sitting tight for your next mass refuse pickup day.

Utilise your shop-vac to vacuum up little bits of garbage, such as residue. You won’t have any desire to surge this progression, as it is one of the most significant with regards to introducing your new floor. Any residue that has not been cleaned from underlayment or subfloor will make it harder for another floor to appropriately stick to the surface.

 

You can do all these on your own, or you can turn to a specialist tile floor removal company for proper execution.

Leave a Reply

Your email address will not be published. Required fields are marked *